Typical Green Bay Water Heater Repair Concerns

06/11/2014 10:51

Your water heater could act up from time to time, even if you put effort and time into its upkeep. Right here are some commonly-occurring troubles and simple solutions to obtain your heater up and running:.

Problem: No hot water from the water heater.

Solution for Electric Heaters:

Your fuse may have blown or you might have inadvertently tripped a circuit. If this keepings taking place, you should turn your heater down. If this still doesn't work, hire an expert to take a look at both your heater and your circuitry.

Solution for Gas Heaters:

1. Ensure that your pilot light is on. If it isn't, follow the directions on your water heater to re-light it. 2. Consider your gas connection valve. It should be entirely open.

Solutions for both Gas and Electric:

1. Your thermostat could be turned off or simply set too low. Make sure your temperature is at 120° F. 2. Your water heater might be gunky. Try draining it. 3. Increase the efficiency of your water pipes by insulating the hot water pipes.

Problem: Water is too hot.

Solution:

1. Your thermostat is probably set at too high a temperature. Turn it down. If your thermostat is no longer working, you should get it repaired by an expert. 2. The flue in your water heater could be obstructed. Examine your flue and clear the obstruction.

Problem: Water heater makes a rolling sound.

Solution:

This rumbling noise could be a sign that your water heater is overheating. Turn it off and let it cool off. Make sure that your thermostat is readied to 120° F or lower. If you thermostat isn't working, get a professional to fix it. If you are still having issues, it could be time for a new water heater.

Problem: Water heater leaks.

Solution:

A leaking water heater must be changed. Turn off the major supply of water and the gas or electrical energy. Get a big container or a hose and drain the tank. Don't attempt to install your brand-new water heater unless you are a quite sophisticated plumbing professional.


 

Problem: Pilot light is yellow.

Solution:

You could have to adjust the shutter in your water heater's burner. You should employ a professional.

Problem: Heater smells of gas.

Solution:

You may be believing that you should relight your pilot light. DO NOT DO THIS. Rather, get everyone out of the house and turn off the main gas supply. As soon as you are in a safe place, call your energy company.

If you make sure that your gas leakage is little, follow these steps to test for a leaking gas supply:

1. Shut off the primary gas supply.

2. Open all windows and doors to air the space out.

3. Making use of a sponge soaked in soapy water, soak the gas line. Turn the gas supply on. If you see any bubbles, then you absolutely have a leak. Turn off the main gas supply and call a professional plumber.